Installer
	16.06.15	V3.1.Rel5/6/16/529
	22.09.15	V3.2.Rel5/9/22/991
	12.10.15	V3.3.Rel5/10/12/473 - do not use
	23.10.15	V3.4.Rel5/10/23/417
	07.12.15	V3.5.Rel5/12/7/812
	02.02.16	V3.6.Rel6/2/2/642
	03.03.16	V3.7.Rel6/3/3/924
	03.05.16	V3.8.Rel6/5/3/578
	07.07.16	V3.9.Rel6/7/7/816
	25.07.16	V3.10.Rel6/7/25/503
	04.10.16	V3.11.Rel6/10/4/770
	27.10.16	V3.12.Rel6/10/27/483
	07.03.17	V3.13.Rel7/3/7/822
	20.03.17	V3.14.Rel7/3/20/911
	01.06.17	V3.15.Rel7/6/1/901
	14.09.17	V3.16.Rel7/9/14/760
	27.09.17	V3.17.Rel7/9/26/740
	16.05.18	V3.18.Rel8/5/16/737
	04.06.18	V3.18.Rel8/5/16/737 - FCCDisplay V3.18.Rel8/6/4/725
	03.08.2018	V3.19.Rel8/8/3/663
	27.11.2018	V3.20.Rel8/11/27/807
	15.01.2019	V3.21.Rel9/1/17/753
	21.02.2019	V3.22.Rel9/2/21/834
	15.04.2019	V3.23.Rel9/4/15/987
	02.09.2019	V3.24.Rel9/8/23/1138


All Files

	25.09.14	RTube V2.11.x.xx changed to V3.x
	30.09.14	1st Beta-Release
			Janus is now included in RTube3x.exe
			Communication between Tube-system and RTube via TCP/IP
	23.10.15	V3.3 at least main application on server should be replaced by V3.4 - communication via TCP/IP is too slow in V3.3
	04.10.16	Installer V3.11 "Setup Error -f"-Problem solved
	17.03.17	Chinese Language: almost all texts translated
	14.09.17	V3.16 must be used to connect to FCC1.54 or higher!
	16.05.18	V3.18 recommended for FCC 1.60 or higher.
	04.06.18	FCC-Display repaired.
	27.11.18	V3.20 Problems with chinese characters solved.
			WARNING:You cannot downdate to older versions because of different string-encoding in ini-files!
	15.04.19	V3.23 Problem with long destination-names solved; Sending of TAN-Count to FCC enhanced


=====================================================================================================================================

RTube3x.exe
	
	30.09.14	Janus is now included in RTube3x.exe
	10.11.14	R-Tube das not answer to Neighbor-requests -> Special Version for parallel use with R-tube 2.x
	13.03.15	Janus: TCPIP must have ACK to CC to avoid blocking of connection.
			Ethernet stable now
	17.04.15	CAN in uses CAN3-Types only (CAN-out still uses CAN2)
	23.04.15	RTube sets CC-Counter and CC-Time
	30.04.15	Strange state-display for diverters -> solved
	10.06.15	Zone- and Device- states from unknown zones filtered (it seems that damaged messages create a state of a non existant device or zone)
	15.06.15	Error while boot "Address double used" -> solved

	V3.2.beta
	17.07.15	
	5/7/17/508	Problem with deleting CAN-Sendfile when restarting R-Tube -> solved
			Janus connects now local (127.0.0.1:6161) to a R-Tube-DataServer (Thekla)
	17.09.15	
	5/9/17/939	Message for setting FCC-Clock was sent too often - ok now.
	5/9/22/991	remove CAN-Send-file while startup works now
		
	V3.3.beta
	02.10.15
	5/10/2/765	KeepAlive on TCP/IP-connections is faster now. Lost connection detected in aprox. 10-12s 
			Reconnecting to CC is faster now <10s
	05.10.15
	5/10/5/668	Transport-Data as X-Frame can be received on CMD201 (FCC1.40e)
	
	
12.10.15
	5/10/12/473	New Options: Customer Modules introduced to start customer-specific modules
			customer-modules are for example: Brinks-Counter, Schoenox-Module and Statistic Module (extended statistic functions for HEH)


	15.10.15	Debug-Mode for FCC can be set per CC - Ethernet-connection will timeout after 1 hour when debug-mode is on.

	V3.4.Rel
	22.10.15	4-Byte Acknowledge-Message reactivated to speed up Ethernet connection. (CC does not use delayed Ack!)
	5/10/23/417	Version vor Installer

	27.10.15	Detection of Jobtype improved - CC sends RT-Event 0x50 before PNR.
	
07.12.2015	
	V3.5.Rel
	5/12/7/812	Debuging Mode for TCP/IP-Connections: In debug-mode timeout is set to 1hour.
			Installer created

10.12.15
	V3.6.Beta
	5/12/10/683	TCP/IP-connection could send too long package to FCC when Nagle-Algorythm is used. -> Nagle disabled.
02.02.16
	V3.6.Rel
	6/2/2/642	Frontend will always be on Top of Desktop and cannot be hidden by other applications

26.02.16
	V3.7.Beta
	6/2/26/557	By moving R-Tube Frontend always on top of desktop some windows stayed behind parent-windows 
			(e.g. Save- and Password- Dialogs) -> solved.
01.03.16
	6/3/1/851	Status ignores messages from zones who do not answer to a neighbor-request.
			-> avoids display of "Ghost"-zones caused by corrupted messages
	6/3/1/1009	Static tube-switches will work again (weren't recognized when message longer than 3 Byte)

	V3.8.beta
	6/5/3/513	When starting R-Tube for the first time in previous versions it could happen, that License-Activation-Window 
			is hidden behind the Settings-Window. ->Solved
	10.06.16
	V3.9.beta
	6/6/10/781	Error-detection while reading CAN-data improved. Analysis-thread got stuck at 0x00-Data. Now ok.
			Finding next CAN-file improved - wrong file-extensions (e.g. .zip) are filtered now.

21.06.16
	6/6/21/709	Menu: "Show Communication" restores Communication-Monitor Window to Window-State normal (minimized window will popup)

06.07.16
	6/7/6/993	System-State and Programmer got stuck because CAN-Scan-Thread had an exception. -> Solved
07.07.16
	6/7/7/816	For device-state H61F-Diverters are detected by Version-report -> Missing diverter-Bit added and Motor0 is mapped on Motor1

22.07.16
	V3.10.beta
	6/7/22/565	Error-Messages are only added to Transport if TAN of Error matches with TAN of Transport	
25.07.16
	6/7/25/503	R-Tube-Number limited to 15. Higher numbers will be reduced to 15. 

04.10.16
	V3.11.Rel
	6/10/4/770	Read CAN-Data gets sometimes stuck. Try-Catch in "readnext": "catch" can close filestream now.
			Main-Application detects if R-Tube was started from another user-account and switches over to client-mode.

18.10.16
	V3.12.beta
	6/10/18/966	Beta only: Connection to CC is established after receiving a UDP-Message (broadcast) from CC.
			Beta only: If a connection is not established R-Tube sends an UDP-Message to CC to force a UDP-Reply.
			FCC-Display is now available in popup-menu + HotKey F7
20.10.16
	6/10/20/615	Reading CAN-Files can get stuck when detecting too many checksum-errors. 
				Up to now: Tried to use next file. -> could take up to 1 hour until it works again!
				Now: Trys to skip message or use next file. 

27.10.16
	6/10/27/476	Reading CAN-Files: further improvements

16.01.17
	V3.13.beta
	7/1/16/xxx	FCC-Display - new file-format => needs new FCC-Display-Application (V3.13.beta7/1/17/xxx)

06.03.17
	7/3/6/518	"Postcard" can be received from any device. Message-Filters for old ECC-Versions (Transfer-protocol via TR-Bridge) is no longer necessary.
			Testing-features for R-Tube4 (Connection to Thekla) disabled.
	7/3/7/822		Problem with Checksum-error at end of can-file solved
			
28.03.17
	V3.15.beta	Janus-Logfile: Entry for DCC-disconnect contains status-byte and description now.

29.05.17
	V3.15.Rel
	7/5/29/423	Communication-Monitor: If R-Tube Host is started by RTHostSrv established connections can be displayed displayed now by a RT-Client.
				Communication-Monitor Window will have a "*" behind the window-name to show that this information is displayed by a RT-client.

19.06.17
	V3.16.beta
	7/6/19/692	Error in recording of CAN-Block-Data solved (Block-Messages CMD202 with less than 7 Databytes have been extended like in RT2)

04.09.17
	V3.16.beta
	7/9/4/902	RTube allways sends a UDP-Broadcast to announce a connection to the CCs (CCs will refuse connection if there is no announcement via UDP before)
26.09.17
	V3.17.rel
	7/9/26/740	On some systems FileManager was started to often (every 30sec). Now solved - creates entry in Log-File when started.
09.11.2017
	V3.18.beta
	7/11/9/824	UDP-Message for announcing IP-address of RTube to CC is now sent to address (no broadcast)
	7/11/13/584	UDP-Message for announcing IP-address of RTube to CC is now sent to address and as broadcast.
	7/11/29/750     Bugfix: Transport-Data will create a new line in Historyfile when sender = CC (Not Ether in CarrierManager)

14.03.2018
	V3.18.beta
	8/03/14/865	BugFix: Writing FCCDisplay could cause freezing of application. (Thread collision)

16.05.2018
	V3.18.Rel
	8/5/16/737	BugFix: If there are too many invalid Messages in a CAN-File creation of JobHistory could block.
			BugFix: Neighbor-Search-Message repeated by other CC (Sender = Ether) could change IP-Address of CC to Address of other CC

05.06.2018
	V3.19.beta
	8/6/5/746	if FCC sends Device-State-Request with Receive-Zone=255 detection of not communicating devices fails. Solved.
	8/6/5/849	RT-Event for "No Communication" is now processed.

07.06.2018
	8/6/7/491	Destination-Name-Request from FCC is proccessed and answered now.

12.06.2018
	8/6/12/972	Alarm-Byte in System-State is used now.

11.07.2018
	8/7/11/419	Bug-Fix: Job-Cancel from CC is sent e.g. if an old job is deleted in revolver. This could lead to wrong entrys in RT-History-file.
				=> Cancel is now filtered by Sender-Zone
			Enhanced: Wrap around in TAN-numbers is now handeled.

27.07.2018
	8/7/27/480	Destination-Name-Request from FCC is answered to requesting device now.

27.11.2018
	8/11/27/807	BugFix: Strings which have been saved in ini-files had problems with some chinese characters -> fixed

08.01.2019
	V3.21.beta
	9/1/8/698	BugFix: Error and Alarm-Number could be displayed wrong in System-Sate when connected to old FCCs -> fixed
09.01.2019
	9/1/9/802	BugFix: R-Tube Errors without TAN could get a random TAN -> fixed
			Added: Changes of Motor-State are noe in Event-History
			Added: Purge-Event is now recorded
11.01.2019
	9/1/11/xxx	BugFix: When FCC sends Data to CarrierManager, Start- and Stop-Event could be recorded double depending on FCC-Release -> fixed
			Added: Destination "1M" = Mapped Destination1 is now recorded.
15.04.2019
	V3.23.Rel
	9/4/15/987	Enhanced: TAN-Count was sent too early. Now it is sent on System-State "Boot", too.

12.08.2019
	V3.24.beta
	9/8/12/834	BugFix: neighbor-request as UDP-broadcast could redirect Messages from RT to wrong FCC -> fixed
 


=== RTube3x.exe END ===
 
=====================================================================================================================================

RT3xHistory.exe

	07.10.14	Soft-ICE-launcher repaired
			uses now correct icon
	20.10.14	Zone-state: Column for zones: Zone-numbers bigger than 99 fit in now.
	V3.2.beta 
	5/7/2/523
	02.07.15	Index-Error in Job-Historx could lead to endless loops -> solved
	10.09.15	Performance statistics: new columns: job (+%) and "stop after error"

	V3.3.beta
	12.10.15
	5/10/12/473	Performance statistic has been extended with customer-Module for HEH and other hospitals

	v3.4.Rel	Performance statistic complete for HEH

	07.12.15
	V3.5.Rel
	5/12/7/812	Performance statistics - head of column "Jobs:" can now be translated.	
	V3.9.
	6/5/10/517	Performance statistics - if there are data-failures in Time-recording there could appear negative run-times -> now Filtered

	V3.10
	6/7/13/417	Performance statistics - Statistics of transports (incl. %), Average Duration of Transport and Average Wait-Time 
				split up in for categories of Transport: total, local, to neighbor, from neighbor
22.07.16
	6/7/22/565	Details-Display - Error-Messages are now listed with TAN of according transport.

19.09.16
	V3.11.beta
	6/9/19/461	Performance statistics - if there are data-failures in Time-recording there could appear negative run-times -> Filter improved (Total-Time / Wait-Time)
	V3.11.rel
	6/10/4/770	New Job-Types included: Revolver load / unload

17.01.17
	V3.13.beta
	7/1/17/698	Performance statistics - If two R-Tube Hosts are writing on same History-file it could happen, that the position-data in a transport-record is not correct (position is one before)
				then a endless loop will occur -> Solved: If position Data does not fit transport-record is ignored.

14.03.17
	V3.14.beta
	7/3/14/460	Preformance statistics - On displays with a resolution smaller than full HD, buttons on the right side (recalc, close) were not completely displayed -> solved
	7/3/14/576	xls/csv-export - progressbar does not return to 0% anymore when reading big history-files.
	7/3/14/664	xls/csv-export - indexerror in history-file caused abort (Problem at HEH: two RTs write in same file! -> HEH) -> Transports with indexerrors are skipped now.
20.03.17
	7/03/20/616	System-State: Error-relay is now displayed in extra column.	

08.09.17
	V3.16
	7/9/8/793	Performance Statistics: local transports during peak-time have been counted double -> solved.

18.12.17
	V3.18
	7/12/18/908	Performance Statistic: Calculation of max. value for Progressbar could deliver too small results if day of end-date
				is smaller than day of start-date

12.06.2018
	V3.19
	8/6/12/972	Alarm-Byte from System-State is displayed now 

09.11.2018
	V3.20
	8/11/9/526	Bug-Fix: In Statistics/Crosstable the Mode-parameter could not be switched back from "Devices" to "Destinations" -> fixed

27.11.2018
	8/11/27/807	BugFix: Strings which have been saved in ini-files had problems with some chinese characters -> fixed

08.01.2019
	V3.21
	9/1/8/801	BugFix: When changing Filters it could happen that Transports of last selection which should be not in the new one,
				 are still displayed -> Fixed
11.01.2019
	9/1/11/xxx	Added: Columns for Destination "1M"=Mapped Destination1 added 
			Added: Version-Detect for Column-Settings

30.01.2019
	V3.22
	9/1/30/577	BugFix: In case of TranportTime-Too-Long-Error the wrong columns were marked red. -> fixed
			Change: TranportTime-Too-Long-Error was marked in Message-Column Dark-Red to Red. 
				New: From Standard-Color (White/light green, green) to yellow.
21.02.2019
	9/2/21/834		BugFix: Prio bigger than 1 was marked in wrong column
			BugFix: Events: Motor-Flag 0x40 (abort) does not trigger a message anymore because it is set by a "turn on the flight" of the motor


=== RT3xHistory.exe END ===	

=====================================================================================================================================

FileManager
	
21.10.14	removes all files who match "rt*" in Can-data directory which are older than 1 Year or if there is no diskspace older than 90days

01.06.17
	V3.15.rel
	7/6/1/836	Previous Version found "RT20SendCAN" first and stopt search because this file was not old enough.
			New Version removes all files who match "RT20CAN*" and  "RT3xCAN*" if they are older than 1 Year.

=====================================================================================================================================

SoftICE
	17.04.15	Send-Message repaired
			CC-Filter and Zone-Filter are combined by OR
			CC-Filter with Standard-Adresses can be expanded to all adresses
06.06.15		Columns for Flange and Slot introduced

	V3.2.beta
18.6.15	
	5/6/18/945	When started from R-Tube: CCs from R-Tube-settings are activated - all Zones are not activated
			When started from History: CCs are not activated - Zone of selected Job is activated
	09.09.15	Hint-Function opens now a seperate window to decode all values
			right-click = open hint; left-click = close hint
	
17.09.15
	5/9/17/920	Flag-Column: Colors changed and new types:
				S -> Short Frame 	-> clWhite
				L -> Long Frame		-> clWhite
				X -> extended Frame	-> clWhite
				Y -> long+ext. Frame	-> clLime
				     Broadcast		-> clAqua

	V3.9.beta
09.06.16	
	6/6/9/726	CC-Filter Standard-Adresses: CC=0 ignores Zone 1-9; CC=10 or higher includes multi-zones.
21.06.16
	6/6/21/709	Msg-Send could not send Block-Data10-Msgs (Prio = 9) -> solved
22.07.16
	V3.10.beta
	6/7/22/740	Scrolling got blocked at lines with a message-count higher than 1 -> Solved
			MouseWheel when using Windows10 works now.S

06.12.2016
	V3.13.beta
	6/12/07/401	Device GU renamed to CM = Carrier Manager
17.01.17
	7/1/17/1018	TR-Trace-Button is available now. Starts new ICE-Application which filters TR-Messages with same TR-ID

25.01.17
	7/1/25/779	Extended Frame-Viewer can decode FDAT and TR-requests, -answers and -debugs
			TR-Trace enhanced. When clicking on first message of TR-routing it failed -> solved now

16.05.18
	V3.18.Rel
	8/5/16/737	Uncheck-Buttons for CC- and Zone-List

23.07.18
	V3.19.beta
	8/7/23/997	Decoding of TR-Answer Version 5 now available. TRID is now split up in Zone and Count(#).
			TR-Answer decoding: Speed/Prio is now split up in upper and low nibble for Speed and Prio
			Bugfix: Decoding of TR-Answer: Runtime is now Big-Endian.

27.7.2018
	8/7/27/548	New Column with Zone of Rec-Device
			Extended Frame-Viewer: FDAT decoding is able to process FDAT-Version 8 (FCC1.62a)
			Bug-Fix: TR-Answer V4 is decoded correct again.
			

=====================================================================================================================================

Setup Editor
	22.09.15	Device-number of Y-Diverters now shown as "W" (not as "S" as before)
	02.02.16	New Device-types T-Root, Motor-Valve, Val S, Val B
			Traffic-Option can be modified
			new: Receive-Device - none, belt, basket -> changes dev in Graphics
	V3.8.beta
	6/4/26/981
	27.04.16	Due to performance issues TreeView replaced by a Grid.
	29.04.16	Button "Tree Sort" added: moves devices in order of the system-tree.			
	02.05.16	Changing of CC-Number and Zone-Number fixed
	12.05.16	Changing of Zone-Number fixed
	V3.10.beta
	20.07.16	Device before can be chosen from other device of CC, too. All devices after chosen device move to new zone, too.

V3.20.rel
27.11.2018
	8/11/27/807	BugFix: Strings which have been saved in ini-files had problems with some chinese characters -> fixed

08.01.2019
	V3.21
	9/1/8/897	BugFix: When changing to graphics-settings for the first time existing values (e.g. positon) have been set to 0. -> fixed
17.01.2019
	9/1/17/754	BugFix: Upload Names to H61E-Stations (V5.xx/6.xx) did not work -> fixed !!!no upload to H61F-Stations!!!

15.04.2019
	V3.23
	Rel9/4/15/684	BugFix: Long Destination-Names did not work anymore due to new save-method. ->fixed

=====================================================================================================================================

Graphic

	22.09.15
	V3.2.beta
	5/9/22/xxx	Root-Device shows Blower-Number (1 = standard; 2 = RSF on)
			Device-State-Window shows now System and Blower State
	02.02.16	
	V3.6.Rel
	6/2/2/642	Belt-option for Type 650
			New Types for Bag-Systems in France: T-Root, Motor-Valve, Val S, Val B
			Air-Path for Y-diverters and Valves improved
	V3.9.Rel
	6/7/7/815	Diverters in H61F - motors mapped correctly

V3.20
27.11.2018
	8/11/27/807	BugFix: Strings which have been saved in ini-files had problems with some chinese characters -> fixed

06.06.2019
	9/6/6/545	BugFix: Name of Graphics-Objects was shortened to 7 chars -> fixed

			
=====================================================================================================================================

RTube Server "Thekla"

	29.06.15	Development started...
	18.11.15	Moved to RTube4-Project.
	

=====================================================================================================================================

LanguageTool

V3.8.Beta6/3/10/958
	10.03.16	Romanian changed to Indonesian Language.


=====================================================================================================================================

FCC-Display

18.10.16
	V3.12.beta
	6/10/18/966	First Version of FCC-Display
19.10.16
	6/10/19/416	Release detects R-Tube (Main Application) and closes if it is not present.

17.01.17
	V3.13.beta
	7/1/17/xxx	file-format changed - can read now new files provided by R-Tube

17.03.17
	V3.14.beta
	7/3/17/820	Display-Areas are now sizeable
			Ethernet-Info is displayed in correct order
			Size of displays is restored after restart
			font-color now available on all 4 displays

19.06.17
	V3.16.beta
	7/6/19/857	Refresh of screens improved - does not scroll through anymore... but flickers when new lines come in :-(

04.06.18
	V3.18.Rel
	8/6/4/725	Bug-Fix: Access-Violation - RT3xBasic1-Object was not initialized correctly.

15.04.2019	
	V3.23.Rel
	9/4/15/697	Bug-Fix: Application closed on too many keys -> fixed





=====================================================================================================================================


=====================================================================================================================================
=====================================================================================================================================

END OF FILE

=====================================================================================================================================
=====================================================================================================================================
















